Connectivity & Protection Solutions

OnSite™ Equipment Mountings

Legacy Transmission Products

Pulsecom Products

 
   
 

Legacy Transmission Products

NCTE: Data Station Termination (DST)
Plug-in Test Cards
 
NCTE: Data Station Termination   (Return to top of page)  
   

Technical Document
 
DST5417 Iss.3 L11
CLEI Code: DSTNV4Y3AA
The DST5417 Issue 3 List 11 is a manually provisioned 200-Mechanics sized active interface between a 4-wire facility and a 2/4-wire data modem. The DST5417I3L11 provides cable equalization, facility impedance selection, selectable loopback activation tone, drop-side transmit and receive variable signal level adjustments, and selectable 2/4-wire drop through on-board manual switches. The DST5417I3L11 is powered from a local -48Vdc or 24Vac source.
 

 


Technical Document
DST2496 Iss.2
CLEI Code: DSTOBFFCAA

The DST2496I2 is an intelligent 200-Mechanics sized active interface between a 4-wire facility and a 2/4-wire data modem. The DST2496I2 supports 3 or 4 tone equalization alignment, multiple loopback activation tones, and drop-side transmit and receive signal levels selectable through remote tone provisioning. Facility impedance and 2 or 4-wire drop can be selected through on-board manual switches. DST2496I2 also allows the user to set the drop-side signal levels for Data or FAA applications, select the loopback activation tone, and manually activate signal loopback from the front panel pushbutton switch. The DST2496I2 can be powered from a local -48Vdc/24Vac source or from the span sealing current. The DST2496I2 also has external sealing current connections for supplying or terminating applications.

 

Technical Document
SDS5486SBI2
CLEI CODE: NCC1HPHEAA

The SDS5486SBI2 is an intelligent 200-Mechanics sized active interface between a 4-wire facility and a 2/4-wire data modem. The SDS5486SBI2 supports 3 or 4 tone equalization alignment, multiple loopback activation tones, and drop-side transmit and receive signal levels selectable through remote tone provisioning. Facility impedance and 2/4-wire drop selection are through on-board manual switches. The SDS5486SBI2 also allows the user to set the drop-side signal levels for Data, Voice, or FAA applications, select the loopback activation tone, and manually activate signal loopback from the front panel pushbutton switch. The SDS5486SBI2 can be powered from a local -48Vdc/24Vac source or from the span sealing current. The SDS5486SBI2 also has external sealing current connections for supplying or terminating applications.

 
 
Plug-in Test Cards   (Return to top of page)
   

Technical Document
 

CTC-239B
Provides access to transmission pairs in a 239-type shelf.


Technical Document
CTC-239S
Allows the network and customer transmission paths to be passed through a 239-type shelf.
 
home       products       news & events       about us       contact us       customers
    website by rericha.com